，左右两锯片均为固定 45 °切割，使设备整体结构更简约、更容易操作。 1. Both the left and right saw blades are fixed at 45 ° cutting, which makes the overall structure of the device simpler and easier to operate.
，锯片切割高度可调，用户可根据具体的型材设定切割高度，减少锯片的运行空程，提高切割效率。 2. The cutting height of the saw blade is adjustable. The user can set the cutting height according to the specific profile to reduce the idle running of the saw blade and improve the cutting efficiency.
，送料手调速改为全数控控制，并且系统能够记忆所切割型材的机械手位置。 3 , the speed of the feeding hand is changed to full CNC control, and the system can memorize the position of the manipulator of the cut profile. When changing the profile, the position of the profiled manipulator that has been cut can be called out systematically, reducing the time for adjusting the manipulator every time the profile is changed, and improving production efficiency.
，送料架采用全新的结构设计，使送料速度更快、更稳定。 4. The feeding frame adopts a new structure design, which makes the feeding speed faster and more stable.
，上料和出料架采用工业流水线型材组合而成，使设备外观更显大气。 5 , the loading and unloading racks are made of industrial assembly line profiles to make the appearance of the equipment more atmospheric.
，设备控制系统全部采用施耐德数控系统，并且随设备附带创赢门窗优化软件，材料优化好后，由系统读入材料优化数据并实行切割，避免传统的人工输入方式造成的切割尺寸错误。 6. The equipment control system all adopts Schneider CNC system, and the software of window and door optimization is included with the equipment. After the material is optimized, the system reads the material optimization data and implements cutting to avoid the wrong cutting size caused by traditional manual input methods.
Main specifications and technical parameters
AC380V 50Hz Power supply: three-phase four-wire AC380V 50Hz
13.6kw （主机 7.6kw 吸尘电机 3kw*2 ） Total installed power: 13.6kw (Host 7.6kw vacuum motor 3kw * 2 )
0.5-0.7Mpa Air source: 0.5-0.7Mpa
500*4*3.4*30*120T （日本兼房） Saw blade specifications: 500 * 4 * 3.4 * 30 * 120T (Japanese room)
2.2kw 2840r/min Saw blade spindle motor: 2.2kw 2840r / min
45 ° Cutting angle: 45 ° left and right
度切割型材断面： 125*150mm （宽 * 高） 45 degree cutting profile section: 125 * 150mm (width * height)
200mm~6000mm Feeding length: 200mm ~ 6000mm
0.1mm Length cutting accuracy: plus or minus 0.1mm
3300~6200mm Blank profile length: 3300 ~ 6200mm
6~8 根 Number of blank profiles stored in the feeding area: 6 ~ 8
7600mm Feeding robot stroke: about 7600mm
900mm Discharge robot stroke: about 900mm
0~70m/min Feeding and discharging manipulator running speed: 0 ~ 70m / min
0~15m/min Saw blade vertical running speed: 0 ~ 15m / min
15 秒 / 支 Cutting efficiency: average 15 seconds / piece
8 小时下料约 2000 支 About 2,000 sticks are cut for 8 hours a day
5000kg Weight: about 5000kg
13200*3600*2100mm Dimensions: 13200 * 3600 * 2100mm